Prediction Accuracy

Technology trends in forecasting renewable energy generation

Renewable energy forecasting is critical for integrating variable renewa­b­le energy resources like wind and so­lar power into the grid. Wind and solar power are heavily dependent on weather conditions, and thus their energy generation pa­tt­erns are quite erratic. This creates problems not only for grid operators who must account for these frequent fluctuations in their load management schedul­es, but also for power generators who ha­ve to pay hefty charges for deviation from scheduled energy generation.

Accurate renewable energy forecasts help generators plan their operations better. Me­an­while, for grid operators, forecasts help them predict the ramp up and down in generation and they can then manage load accordingly. This helps in reducing fuel costs, improving system reliability, and minimising energy curtailment.

For a particular region or state, renewable energy forecasting can be carried out in a centralised as well as a decentralised ma­­nner. Many in the industry believe that cen­tralised forecasting is more suitable for ensuring overall grid stability as it provides energy forecasts for all the projects in a specific region. Meanwhile, decentra­li­sed forecasts provide only plant-level in­formation. Thus, for grid operators, cen­tra­lised forecasts would offer better consistency owing to the use of a single technique as well as less uncertainty. How­ev­er, even in centralised forecasts, it is vital to use a mix of techniques to improve ac­curacy and prevent errors.

Forecasting techniques

Time horizon is often a key factor for determining the forecasting accuracy, which te­n­ds to decrease over a longer time as per a 2020 report by the International Renew­able Energy Agency (IRENA) titled “Advan­ced Forecasting of Variable Renewable Power Generation”. Very short-term forecasting that ranges from a few seconds to minutes to an hour helps in real-time po­wer despatch and maintenance of smooth grid operations. Grid load management requir­es short-term forecasting ranging from 1 hour to 24 hours. Medium-term fo­recasting, ranging from one week to one month, is useful for planning grid maintenance and long-term forecasting helps authorities in overall generation and transmission planning.

Operators can procure weather forecasts from various vendors and meteorological research institutions, or they can develop their own methodology. According to the US-based National Renewable Energy La­boratory, forecasting can be carried out using physical methods or statistical me­thods. Physical methods use weather da­ta and numerical weather prediction (NWP) models to estimate energy prod­uction. Meanwhile, statistical methods use NWP data along with historical and real-time generation data to arrive at precise estimations.

A July 2019 technical guide titled “Using Forecasting Systems to Reduce Cost and Improve Dispatch of Variable Renewable Energy” by the Energy Sector Manage­me­nt Assistance Program (ESMAP) of the World Bank describes various methods for forecasting variable renewable energy. The key techniques described in this guide can be grouped under physical methods, statistical methods and hybrid methods.

Forecasting models based on physical methods: Weather data like air temperature, pressure and surface roughness is used to make meteorological predictions that complement local conditions. Such models include NWP, remote sensing and local sensing. NWP models use weather data from radiosondes or weather satellites and mathematical representations of atmosphere for predictions. Remote sensing models use data on satellite-based weather measu­re­ments, which are acquired from various sources that can help provide good estimates without using many local sensors. Local sensing models use high resolution spatial and temporal data that is captured from points located at or close to the site to assess actual field conditions.

Forecasting models based on statistical methods: Statistical methods are based on patterns and rely on gathering large amounts of historical data to assess and predict energy output. In statistical methods, a reference model or baseline is often required for compa­ring and predicting output. This foreca­sting reference is used in many comp­lex statistical methods to accurately predict output. Persistence models are simple statistical models that assume that if the conditions remain unchan­g­ed between two time periods, the fo­­­re­cast will also remain the same. Time series-based modelling and statistical methods use data collected over a period of time to assess and pre­dict future output.

More advanced artificial intelligence (AI) me­thods use neural networks instead of regression models to predict output using historical data, weather conditions and the relationship between the two. Both solar and wind power projects are witnessing lar­ge-scale uptake of AI tools to enable more precise forecasting and scheduling. The­se advanced digital techniques are fa­ster and more precise in assessing the large volumes of data available. Now, ma­­­ny operators are even using digital twins to further improve forecast accuracy.

Forecasting models based on hybrid methods: As the name suggests, hybrid models use both physical and statistical methods to forecast output. As they combine the characteristics of both, they are more effective and accurate.

Key challenges and the way forward

With the increasing penetration of variable renewable energy into the grid, it is be­coming quite critical to incorporate ad­­vanced forecasting and scheduling techniques to ensure grid stability. How­ever, there are still many issues that need to be addressed before proper forecasting tools can be deployed. First, there re­mains some level of uncertainty in ac­curate weather forecasting that needs to be taken care of as solar and wind energy generation have a significant dependence on the weather.

Second, refined regulatory frameworks must be designed that take grid balancing and ancillary services into consideration. Third, grid operators and manpower need to be trained regularly regarding the latest developments in this space and more efforts need to be diverted towards incorporating advanced AI tools for forecasting. Finally, with large volumes of distributed renewable energy assets and electric vehicles being connected to the grid, forecasting and course correction in real time with advanced tools and techniques is playing a vital role in stable grid operations.

GET ACCESS TO OUR ARTICLES

Enter your email address